You are here: Home > Products > Lighting > Gavita
We found 76 results matching your criteria.
Sort By:
Page of 2
Gavita M6 Eyebolt & Hex Nut Assembly Gavita M6 Eyebolt & Hex Nut Assembly

L 3.7in x W 3in x H 0.25in

Pair of eyebolts with M6 hex nuts to hang your Gavita lighting fixtures. Includes 2 M6 eye bolts and 3 M6 hex nuts.

List Price: $1.65
Our Price: $1.65
Gavita E-Series LED Adapter Interconnect Cable 2.5ft RJ45 to RJ45 Gavita E-Series LED Adapter Interconnect Cable 2.5ft RJ45 to RJ45

L 5.12in x W1.57in x H 0.98in

The E-Series LED Adapter is designed to be used with the Gavita 1700e LED fixtures. This product runs inline with the power cord to the fixture. Using this device in conjunction with the LED fixture will allow you to control them with an EL series controller. These adapters utilize cables with RJ45 connectors for daisy chaining the control signal between adapters. Please use 906715, 906716 or 906717 for communication with the EL controller. Adapters are cETLus listed as well as IP66 rated for commercial use.

  • Allows for controllability from EL series controllers
  • Rated for commercial use

List Price: $3.25
Our Price: $3.25
Gavita Interconnect Cables RJ14 / RJ14 2 ft / 60 cm Gavita Interconnect Cables RJ14 / RJ14 2 ft / 60 cm

L 9in x W 3in x H 0.3in

Gavita E-series interconnect cables are used to supply controller signal from ballast to additional ballasts (daisy chain), for use with the Gavita Master Controllers. These come in 2, 5, 8 and 10 ft configurations to best fit your specific application.

List Price: $4.58
Our Price: $4.58
Gavita E-Series LED Adapter Interconnect Cable 6ft Cable RJ45 to RJ9 Gavita E-Series LED Adapter Interconnect Cable 6ft Cable RJ45 to RJ9

L 5.12in x W 1.57in H 0.98in

The E-Series LED Adapter is designed to be used with the Gavita 1700e LED fixtures. This product runs inline with the power cord to the fixture. Using this device in conjunction with the LED fixture will allow you to control them with an EL series controller. These adapters utilize cables with RJ45 connectors for daisy chaining the control signal between adapters. Please use 906715, 906716 or 906717 for communication with the EL controller. Adapters are cETLus listed as well as IP66 rated for commercial use.

  • Allows for controllability from EL series controllers
  • Rated for commercial use

List Price: $4.78
Our Price: $4.78
Gavita E-Series LED Adapter Interconnect Cable 10ft Cable RJ45 to RJ9 Gavita E-Series LED Adapter Interconnect Cable 10ft Cable RJ45 to RJ9

L 5.51in x W 1.57in x H 1.38in

The E-Series LED Adapter is designed to be used with the Gavita 1700e LED fixtures. This product runs inline with the power cord to the fixture. Using this device in conjunction with the LED fixture will allow you to control them with an EL series controller. These adapters utilize cables with RJ45 connectors for daisy chaining the control signal between adapters. Please use 906715, 906716 or 906717 for communication with the EL controller. Adapters are cETLus listed as well as IP66 rated for commercial use.

  • Allows for controllability from EL series controllers
  • Rated for commercial use

List Price: $4.92
Our Price: $4.92
Gavita Modular Jack 6P6C 8 pcs Gavita Modular Jack 6P6C 8 pcs

L 5in x W 3.2in x H 0.3in

These modular jacks are clipped onto the ends of the interconnect cables, which allow them to be plugged into splitters and the interconnect outlets on Gavita fixtures. Kit includes 8 pieces.

List Price: $4.95
Our Price: $4.95
Gavita E-Series LED Adapter Interconnect Cable 3 Way Splitter RJ45 Gavita E-Series LED Adapter Interconnect Cable 3 Way Splitter RJ45

L 1.77in x W 1.57in x H 0.79in

The E-Series LED Adapter is designed to be used with the Gavita 1700e LED fixtures. This product runs inline with the power cord to the fixture. Using this device in conjunction with the LED fixture will allow you to control them with an EL series controller. These adapters utilize cables with RJ45 connectors for daisy chaining the control signal between adapters. Please use 906715, 906716 or 906717 for communication with the EL controller. Adapters are cETLus listed as well as IP66 rated for commercial use.

  • Allows for controllability from EL series controllers
  • Rated for commercial use

List Price: $5.40
Our Price: $5.40
Gavita Interconnect Cables RJ14 / RJ14 5 ft / 150 cm Gavita Interconnect Cables RJ14 / RJ14 5 ft / 150 cm

L 8.2in x W 3in x H 0.8in

Gavita E-series interconnect cables are used to supply controller signal from ballast to additional ballasts (daisy chain), for use with the Gavita Master Controllers. These come in 2, 5, 8 and 10 ft configurations to best fit your specific application.

List Price: $5.50
Our Price: $5.50
Gavita 3 Way RJ14 Cable Splitter Gavita 3 Way RJ14 Cable Splitter

L 4.8in x W 2.5in x H 0.8in

The 3 way cable splitter is needed to connect the Gavita Master Controller to your E-Series ballasts when running ballasts inline. Used with Gavita E-series interconnect cables.

List Price: $5.70
Our Price: $5.70
Gavita Controller Cable RJ9 / RJ14 5 ft / 150 cm Gavita Controller Cable RJ9 / RJ14 5 ft / 150 cm

L 8.3in x W 3in x H 0.6in

Gavita Controller Cables attach the Gavita Master controller to the Gavita E-Series ballast. These come in 5, 16 and 25 ft configurations to best fit your specific application.

List Price: $6.35
Our Price: $6.35
Gavita Interconnect Cable for Repeater Bus Gray Gavita Interconnect Cable for Repeater Bus Gray

9.40 L x 3.30 W x 1.10H (in)
Gavita Interconnect Cable for Repeater Bus Gray 6P6C 2m/6.5ft

List Price: $6.50
Our Price: $6.50
Gavita E-Series LED Adapter Interconnect Cable Terminals RJ45 6 Pack Gavita E-Series LED Adapter Interconnect Cable Terminals RJ45 6 Pack

L 1.77in x W 1.57in x H 0.79

The E-Series LED Adapter is designed to be used with the Gavita 1700e LED fixtures. This product runs inline with the power cord to the fixture. Using this device in conjunction with the LED fixture will allow you to control them with an EL series controller. These adapters utilize cables with RJ45 connectors for daisy chaining the control signal between adapters. Please use 906715, 906716 or 906717 for communication with the EL controller. Adapters are cETLus listed as well as IP66 rated for commercial use.

  • Allows for controllability from EL series controllers
  • Rated for commercial use

List Price: $6.50
Our Price: $6.50
Gavita Interconnect Cables RJ14 / RJ14 8 ft / 240 cm Gavita Interconnect Cables RJ14 / RJ14 8 ft / 240 cm

L 8.7in x W 3in x H 0.7in

Gavita E-series interconnect cables are used to supply controller signal from ballast to additional ballasts (daisy chain), for use with the Gavita Master Controllers. These come in 2, 5, 8 and 10 ft configurations to best fit your specific application.

List Price: $7.05
Our Price: $7.05
Gavita Interconnect Cables RJ14 / RJ14 10 ft / 300 cm Gavita Interconnect Cables RJ14 / RJ14 10 ft / 300 cm

L 7.8in x W 3in x H 1.2in

Gavita E-series interconnect cables are used to supply controller signal from ballast to additional ballasts (daisy chain), for use with the Gavita Master Controllers. These come in 2, 5, 8 and 10 ft configurations to best fit your specific application.

List Price: $8.10
Our Price: $8.10
Gavita E-Series LED Adapter Interconnect Cable 10ft RJ45 to RJ14 Gavita E-Series LED Adapter Interconnect Cable 10ft RJ45 to RJ14

L 5.12in x W 1.97in H 1.57in

The E-Series LED Adapter is designed to be used with the Gavita 1700e LED fixtures. This product runs inline with the power cord to the fixture. Using this device in conjunction with the LED fixture will allow you to control them with an EL series controller. These adapters utilize cables with RJ45 connectors for daisy chaining the control signal between adapters. Please use 906715, 906716 or 906717 for communication with the EL controller. Adapters are cETLus listed as well as IP66 rated for commercial use.

  • Allows for controllability from EL series controllers
  • Rated for commercial use

List Price: $8.20
Our Price: $8.20
Gavita Interconnect Cable for Repeater Bus Gray 6P6C 3 m/10 ft Gavita Interconnect Cable for Repeater Bus Gray 6P6C 3 m/10 ft

L 10.8in x W 3.3in x H 1in

Gray interconnect cables used for Gavita fixtures that are equipped with double RJ connectors also know as Gavita Repeater Bus system. You can easily recognize them as they are gray instead of black, and have ferrite coils on each end to minimize interference of external signals. A standard 6.5 ft cable is included with every fixture to connect it to the next. Choose from these additional sizes of cable or create custom lengths with the 25 m/8 ft roll.

List Price: $8.60
Our Price: $8.60
Gavita E-Series LED Adapter Interconnect Cable 10ft RJ45 to RJ45 Gavita E-Series LED Adapter Interconnect Cable 10ft RJ45 to RJ45

L 5.12in x W 1.97in x H 1.57in

The E-Series LED Adapter is designed to be used with the Gavita 1700e LED fixtures. This product runs inline with the power cord to the fixture. Using this device in conjunction with the LED fixture will allow you to control them with an EL series controller. These adapters utilize cables with RJ45 connectors for daisy chaining the control signal between adapters. Please use 906715, 906716 or 906717 for communication with the EL controller. Adapters are cETLus listed as well as IP66 rated for commercial use.

  • Allows for controllability from EL series controllers
  • Rated for commercial use

List Price: $9.75
Our Price: $9.75
Gavita 1-5/8 in Mounting Bracket Assembly Kit (12/Cs) Gavita 1-5/8 in Mounting Bracket Assembly Kit (12/Cs)

L 5.1in x W 2in x H 1in

These 1-5/8 in bracket assembly kits are use to hang your Gavita fixture on a unistrut or rail systems. Includes 1 long and 1 short bracket set with 2 M6 bolts and 1 M6 nut per kit. Use to fasten it on the top plate and lamp bracket. Sold in quantity 12 only.

List Price: $9.95
Our Price: $9.95
Gavita Controller Cable RJ9 / RJ14 16 ft / 5 m Gavita Controller Cable RJ9 / RJ14 16 ft / 5 m

L 8.5in x W 2.8in x H 1in

Gavita Controller Cables attach the Gavita Master controller to the Gavita E-Series ballast. These come in 5, 16 and 25 ft configurations to best fit your specific application.

List Price: $10.15
Our Price: $10.15
Gavita E-Series LED Adapter Interconnect Cable 25ft Cable RJ45 to RJ9 Gavita E-Series LED Adapter Interconnect Cable 25ft Cable RJ45 to RJ9

L 3.94 x W 3.94 x H 1.38in

The E-Series LED Adapter is designed to be used with the Gavita 1700e LED fixtures. This product runs inline with the power cord to the fixture. Using this device in conjunction with the LED fixture will allow you to control them with an EL series controller. These adapters utilize cables with RJ45 connectors for daisy chaining the control signal between adapters. Please use 906715, 906716 or 906717 for communication with the EL controller. Adapters are cETLus listed as well as IP66 rated for commercial use.

  • Allows for controllability from EL series controllers
  • Rated for commercial use

List Price: $10.95
Our Price: $10.95
Gavita Controller Cable RJ9 / RJ14 25 ft / 7.5 m Gavita Controller Cable RJ9 / RJ14 25 ft / 7.5 m

L 8.3in x W 3in x H 0.6in

Gavita Controller Cables attach the Gavita Master controller to the Gavita E-Series ballast. These come in 5, 16 and 25 ft configurations to best fit your specific application.

List Price: $13.25
Our Price: $13.25
Gavita 8 ft Power Cord 120 Volt for LED Gavita 8 ft Power Cord 120 Volt for LED

L 2in x W 18in x H 3in

The Gavita Pro 1700e LED fixture operates at 645 watts with an output of 1700 µmol s-1 PAR and an impressive efficacy of 2.6 µmol s-1 per watt. The Pro 1700e delivers broad, intense light coverage with its 8 passively cooled LED bars allowing you to use it in low rooms, vertical racks, over benches, or even in tents. This powerful, full-spectrum light source is intended for full-term plant growth from the vegetative stage to the higher-light-requiring bloom and finishing stages. Built with premium Philips drivers, Samsung white LEDs and Osram deep-red LEDs, this fixture uses only the highest-quality components. The fixture is dimmable to 50% without any loss of efficiency using the Gavita E-Series LED Adapter and Gavita Master Controllers. The Gavita E-Series LED Adapter - 120-277 V (#906151, sold separately) is required for each fixture when using the controller; non-controlled fixtures simply operate at 100%. The Gavita Pro 1700e LED fixture and Gavita E-Series LED Adapter are FCC compliant, UL8800, and IP66 rated for use in wet environments with a maximum ambient operating temperature of 40°C. Sun Grip® light hangers included. Dimensions: 44.1 in x 43.7 in x 2.3 in. Weight: 28.4 lbs.

Power cords sold separately to operate at your desired voltage.

  • DLC Listed
  • 8 passively cooled bars eliminate moving parts and provide full-spectrum, broad-coverage light for full-term growth
  • High-output 1700 µmol s-1 PAR and an impressive efficacy of 2.6 µmol s-1 per watt
  • Dimmable to 50% when using the Gavita Master Controller and E-Series Adapter
  • FCC compliant, UL8800 and IP66 wet-rated for use in wet environments, allowing for versatile placement in growing spaces with low ceilings, vertical racks, benches or even in tents
  • Reliably sourced components including Philips Drivers, Samsung white LEDs and Osram deep-red LEDs make the 1700e built to last
  • Sun Grip® light hangers included for quick, easy installation

List Price: $14.00
Our Price: $14.00
Gavita 8 ft Power Cord 208-240 Volt for 1650e LED Gavita 8 ft Power Cord 208-240 Volt for 1650e LED

L 2in x 18in x H 3in

The Gavita Pro 1700e LED fixture operates at 645 watts with an output of 1700 µmol s-1 PAR and an impressive efficacy of 2.6 µmol s-1 per watt. The Pro 1700e delivers broad, intense light coverage with its 8 passively cooled LED bars allowing you to use it in low rooms, vertical racks, over benches, or even in tents. This powerful, full-spectrum light source is intended for full-term plant growth from the vegetative stage to the higher-light-requiring bloom and finishing stages. Built with premium Philips drivers, Samsung white LEDs and Osram deep-red LEDs, this fixture uses only the highest-quality components. The fixture is dimmable to 50% without any loss of efficiency using the Gavita E-Series LED Adapter and Gavita Master Controllers. The Gavita E-Series LED Adapter - 120-277 V (#906151, sold separately) is required for each fixture when using the controller; non-controlled fixtures simply operate at 100%. The Gavita Pro 1700e LED fixture and Gavita E-Series LED Adapter are FCC compliant, UL8800, and IP66 rated for use in wet environments with a maximum ambient operating temperature of 40°C. Sun Grip® light hangers included. Dimensions: 44.1 in x 43.7 in x 2.3 in. Weight: 28.4 lbs.

Power cords sold separately to operate at your desired voltage.

  • DLC Listed
  • 8 passively cooled bars eliminate moving parts and provide full-spectrum, broad-coverage light for full-term growth
  • High-output 1700 µmol s-1 PAR and an impressive efficacy of 2.6 µmol s-1 per watt
  • Dimmable to 50% when using the Gavita Master Controller and E-Series Adapter
  • FCC compliant, UL8800 and IP66 wet-rated for use in wet environments, allowing for versatile placement in growing spaces with low ceilings, vertical racks, benches or even in tents
  • Reliably sourced components including Philips Drivers, Samsung white LEDs and Osram deep-red LEDs make the 1700e built to last
  • Sun Grip® light hangers included for quick, easy installation

List Price: $16.00
Our Price: $16.00
Gavita Wieland Mains Power Cord 1 m/3 ft Gavita Wieland Mains Power Cord 1 m/3 ft

L 13.5in x W 2.2in x H 1.3in

Optional power cord for Gavita fixtures 277 volts and higher. This pigtail power cord can be hardwired and can be disconnected by a fixture side IP68 Wieland RST plug. Choose from 3 ft 3 in/1 m, 6 ft 6 in/2 m or 10 ft/3 m in length.

List Price: $16.95
Our Price: $16.95
Gavita 8 ft Power Cord 277 Volt for 1650e LED Gavita 8 ft Power Cord 277 Volt for 1650e LED

L 2in x W 18in x L 3in

The Gavita Pro 1700e LED fixture operates at 645 watts with an output of 1700 µmol s-1 PAR and an impressive efficacy of 2.6 µmol s-1 per watt. The Pro 1700e delivers broad, intense light coverage with its 8 passively cooled LED bars allowing you to use it in low rooms, vertical racks, over benches, or even in tents. This powerful, full-spectrum light source is intended for full-term plant growth from the vegetative stage to the higher-light-requiring bloom and finishing stages. Built with premium Philips drivers, Samsung white LEDs and Osram deep-red LEDs, this fixture uses only the highest-quality components. The fixture is dimmable to 50% without any loss of efficiency using the Gavita E-Series LED Adapter and Gavita Master Controllers. The Gavita E-Series LED Adapter - 120-277 V (#906151, sold separately) is required for each fixture when using the controller; non-controlled fixtures simply operate at 100%. The Gavita Pro 1700e LED fixture and Gavita E-Series LED Adapter are FCC compliant, UL8800, and IP66 rated for use in wet environments with a maximum ambient operating temperature of 40°C. Sun Grip® light hangers included. Dimensions: 44.1 in x 43.7 in x 2.3 in. Weight: 28.4 lbs.

Power cords sold separately to operate at your desired voltage.

  • DLC Listed
  • 8 passively cooled bars eliminate moving parts and provide full-spectrum, broad-coverage light for full-term growth
  • High-output 1700 µmol s-1 PAR and an impressive efficacy of 2.6 µmol s-1 per watt
  • Dimmable to 50% when using the Gavita Master Controller and E-Series Adapter
  • FCC compliant, UL8800 and IP66 wet-rated for use in wet environments, allowing for versatile placement in growing spaces with low ceilings, vertical racks, benches or even in tents
  • Reliably sourced components including Philips Drivers, Samsung white LEDs and Osram deep-red LEDs make the 1700e built to last
  • Sun Grip® light hangers included for quick, easy installation

List Price: $18.00
Our Price: $18.00
Gavita E-Series 240V IEC Power Cord w/ Ferrite 16 Ft (25/Cs) Gavita E-Series 240V IEC Power Cord w/ Ferrite 16 Ft (25/Cs)

L 13.4in x W 4in x H 1.7in

These upgraded 16 ft/5 m 240 volt IEC cord sets with ferrite are for use with the Gavita E-Series fixtures (Part Number 906045, 906086, 906087, 906088, 906089 and 906097).

List Price: $18.05
Our Price: $18.05
Gavita Temperature Probe EL Controller Cable 5 m Gavita Temperature Probe EL Controller Cable 5 m

L 9.5in x W 2.2in x H 0.4in

Use these cables as a replacement or an extension for the temperature probe on the Gavita Master Controller EL1 and EL2. Choose from 16 ft/5 m or 96 ft/30 m.

List Price: $18.45
Our Price: $18.45
Gavita Classic 277 Volt Wieland Cordset 6 ft 6 in Gavita Classic 277 Volt Wieland Cordset 6 ft 6 in

L 10in x W 2.5in x H 2.3in

Optional power cord for Gavita fixtures 277 volts and higher. This pigtail power cord can be hardwired and can be disconnected by a fixture side IP68 Wieland RST plug. Choose from 3 ft 3 in/1 m, 6 ft 6 in/2 m or 10 ft/3 m in length.

List Price: $18.69
Our Price: $18.69
Gavita 3-Way Splitter 6P6C Gavita 3-Way Splitter 6P6C

6 L x 3.50 W x 1.50 H (in)
Gavita 3-Way Splitter 6P6C 4 pcs

List Price: $19.95
Our Price: $19.95
Gavita 2 in Bracket Assembly Kit Gavita 2 in Bracket Assembly Kit

L 5.1in x W 2.25in x H 1in

Gavita mounting bracket assembly kit to hang your Gavita fixture on a 2 in unistrut or rail system. Kit includes 1 long and 1 short bracket, 2 M6 bolts and 1 M6 hex nut.

List Price: $21.95
Our Price: $21.95
Gavita Snap-on Ferrite for Interconnect Cable Gray 8 pcs Gavita Snap-on Ferrite for Interconnect Cable Gray 8 pcs

L 5.9in x W 2.7in x H 0.6in

Snap on gray ferrites to be attached to both ends of custom length interconnect cable between fixtures. Ferrites are needed in order to suppress or filter the amount of high frequency electromagnetic interference (EMI). This is an 8 piece kit.

List Price: $24.95
Our Price: $24.95
Gavita E-Series LED Adapter Interconnect Cable 80ft Spool Gavita E-Series LED Adapter Interconnect Cable 80ft Spool

L 5.12in x W 5.12in x H 1.77in

The E-Series LED Adapter is designed to be used with the Gavita 1700e LED fixtures. This product runs inline with the power cord to the fixture. Using this device in conjunction with the LED fixture will allow you to control them with an EL series controller. These adapters utilize cables with RJ45 connectors for daisy chaining the control signal between adapters. Please use 906715, 906716 or 906717 for communication with the EL controller. Adapters are cETLus listed as well as IP66 rated for commercial use.

  • Allows for controllability from EL series controllers
  • Rated for commercial use

List Price: $29.75
Our Price: $29.75
Gavita Tempered Glass Bracket Gavita Tempered Glass Bracket

L 5in x W 4in x H 3in

Steel kindorf brackets used for Gavita 120V-240V systems. Sold as a set that hangs one fixture with hardware included.

List Price: $32.00
Our Price: $32.00
Gavita HortiStar HR 96 600 SE Reflector Replacement Gavita HortiStar HR 96 600 SE Reflector Replacement

L 151.2in x W 4.1in x H 4.2in

HortiStar 600 SE has a replaceable Miro aluminum reflector with 95% efficiency. This fixture is suitable for HPS and MH lamps 600 watt to 750 watts. The lamp cord terminal is shielded by a metal housing. Installation is very easy with two eye bolts. Comes with 13 ft lamp cord. Reflector dimensions: 20.1 in long x 9.6 in wide x 7.6 in high.

List Price: $37.50
Our Price: $37.50
Gavita HortiStar 96 1000 DE Reflector Replacement Gavita HortiStar 96 1000 DE Reflector Replacement

L 151.2in x W 4.1in x H 4.2in

Our HR96 reflector is made of a very high grade Miro aluminum with 95% efficiency, which provides optimal reflectance of light to your crop. The shape of this reflector may look as a deep reflector, but it actually gives you a medium wide beam angle of about 135 degrees! The spread of the Pro 1000 equipped with the HR96 DE reflector is about 4 x 6 ft (110 x 180 cm) at 3 ft distance in overlapping plans, providing light levels of up to 1000 µmol s-1 m-2. For double-ended 1000 watt lamps. Lamp not included. Reflector dimensions: 20.1 in long x 9.6 in wide x 7.6 in high.

List Price: $37.50
Our Price: $37.50
Gavita Repeater Bus Connection Kit (277V / 400V Only) Gavita Repeater Bus Connection Kit (277V / 400V Only)

L 151.2in x W 4.1in H 4.2in

The Gavita repeater bus connection kit is the Gavita Cabling kit for custom installation. Repeater Bus accessories are different from the Master Controller accessories. Beside a standard RJ 12 crimp tool the kit contains everything you need to make 4 cables with a maximum length 75 ft/25 m in total, including ferrites and 4 three-way splitters to divide your lamps into individual chains. The kit includes: 25 m/82 ft cable, 8 x modular jack 6P6C, 4 x 3-way splitter 6P6C gray, 2 x snap-on ferrite black and 4 x snap-on ferrite gray.

List Price: $39.95
Our Price: $39.95
Gavita Wieland Mains Power Cord 3 m/10 ft Gavita Wieland Mains Power Cord 3 m/10 ft

L 15.0in x W 2.50in x H 1.80in

Optional power cord for Gavita fixtures 277 volts and higher. This pigtail power cord can be hardwired and can be disconnected by a fixture side IP68 Wieland RST plug. Choose from 3 ft 3 in/1 m, 6 ft 6 in/2 m or 10 ft/3 m in length.

List Price: $40.55
Our Price: $40.55
Gavita 300CM Ferrite Cord L7 4770-C 15 Amp Plug Gavita 300CM Ferrite Cord L7 4770-C 15 Amp Plug

L 18.5in x W 3in x H 1.5in

These upgraded 16 ft/5 m 240 volt IEC cord sets with ferrite are for use with the Gavita E-Series fixtures (Part Number 906045, 906086, 906087, 906088, 906089 and 906097).

List Price: $43.49
Our Price: $43.49
Gavita Wieland Extension Cord Gavita Wieland Extension Cord

L 8in x W 8in x H 1.2in

This is a 2 m extension cord for Gavita fixtures. It has a wieland connector on each end of the cable.

List Price: $43.95
Our Price: $43.95
Gavita E-Series LED Adapter Interconnect Cable 80ft Kit (Includes 3 RJ45 and 3 RJ14 Terminals) Gavita E-Series LED Adapter Interconnect Cable 80ft Kit (Includes 3 RJ45 and 3 RJ14 Terminals)

L 5.12in x W 5.12in x H 1.77in
The E-Series LED Adapter is designed to be used with the Gavita 1700e LED fixtures. This product runs inline with the power cord to the fixture. Using this device in conjunction with the LED fixture will allow you to control them with an EL series controller. These adapters utilize cables with RJ45 connectors for daisy chaining the control signal between adapters. Please use 906715, 906716 or 906717 for communication with the EL controller. Adapters are cETLus listed as well as IP66 rated for commercial use.

  • Allows for controllability from EL series controllers
  • Rated for commercial use

List Price: $46.55
Our Price: $46.55
Gavita Pro W 150 DE Reflector Gavita Pro W 150 DE Reflector

L 11.8in x W 10in x H 4in

Replacement reflector for Gavita Pro line and HortiStar. Easy to install, no tools required. Wide spread for optimal uniformity (150° beam angle). Suitable for double-ended 750-1000W HPS. This reflector is most suitable for overlapping plans. Designed for uniformity. Made from MIRO® aluminum.

List Price: $47.50
Our Price: $47.50
Gavita E-Series LED Adapter Interconnect Cable 80ft Kit (Includes 6 RJ45 Terminals) Gavita E-Series LED Adapter Interconnect Cable 80ft Kit (Includes 6 RJ45 Terminals)

L 5.12in x W 5.12in x H 1.77in

The E-Series LED Adapter is designed to be used with the Gavita 1700e LED fixtures. This product runs inline with the power cord to the fixture. Using this device in conjunction with the LED fixture will allow you to control them with an EL series controller. These adapters utilize cables with RJ45 connectors for daisy chaining the control signal between adapters. Please use 906715, 906716 or 906717 for communication with the EL controller. Adapters are cETLus listed as well as IP66 rated for commercial use.

  • Allows for controllability from EL series controllers
  • Rated for commercial use

List Price: $48.05
Our Price: $48.05
Gavita M110 DE SR Reflector Gavita M110 DE SR Reflector

L 11.1in x W 10.1in x H 5.4in

This replacement reflector for the Gavita Pro line and Classic line requires no tools to install. The medium spread of this reflector with 110° beam angle is great for tents and small rooms. This is Gavita's most suitable reflector for single-light set ups. The 110° is designed for uniformity and deep crop penetration in 1-2 fixture configurations. Suitable for double-ended 750-1000W HPS.

List Price: $53.00
Our Price: $53.00
Interconnect Cable Crimper Interconnect Cable Crimper

L 10.43in x W 4.13in x H 1.18in

The E-Series LED Adapter is designed to be used with the Gavita 1700e LED fixtures. This product runs inline with the power cord to the fixture. Using this device in conjunction with the LED fixture will allow you to control them with an EL series controller. These adapters utilize cables with RJ45 connectors for daisy chaining the control signal between adapters. Please use 906715, 906716 or 906717 for communication with the EL controller. Adapters are cETLus listed as well as IP66 rated for commercial use.

  • Allows for controllability from EL series controllers
  • Rated for commercial use

List Price: $63.95
Our Price: $63.95
Gavita 100CM Ferrite Cord L7 4770-C 15 Amp Plug Gavita 100CM Ferrite Cord L7 4770-C 15 Amp Plug

L 16.4in x W 11.5in x H 6.2in

These upgraded 16 ft/5 m 240 volt IEC cord sets with ferrite are for use with the Gavita E-Series fixtures (Part Number 906045, 906086, 906087, 906088, 906089 and 906097).

List Price: $68.55
Our Price: $68.55
Gavita HortiStar 600 SE Reflector Gavita HortiStar 600 SE Reflector

L 20.5in x W 10.1in x H 9.3in

HortiStar 600 SE has a replaceable Miro aluminum reflector with 95% efficiency. This fixture is suitable for HPS and MH lamps 600 watt to 750 watts. The lamp cord terminal is shielded by a metal housing. Installation is very easy with two eye bolts. Comes with 13 ft lamp cord. Reflector dimensions: 20.1 in long x 9.6 in wide x 7.6 in high.

List Price: $99.95
Our Price: $99.95
Gavita ECM1 US 120 - External Contactor Module 120 Volt Plugs Gavita ECM1 US 120 - External Contactor Module 120 Volt Plugs

L 6.3in x W 5.91in x H 3.54in

External Contactor Module (15A) with blue indication LED follows lights-on for main channel. Use ECMs to switch CO2, fertigation, heating etc. during lights-on or lights-off cycle. ECMs can be positioned close to the actual accessories. Cable outputs with female and male connector allow easy connection of accessories. Contains industrial contactor, suitable to power 15A loads or to power trigger input. Cage clamp connection for control cord allows easy installation.

List Price: $99.95
Our Price: $99.95
Gavita ECM1 US 240 - External Contactor Module 240 Volt Plugs Gavita ECM1 US 240 - External Contactor Module 240 Volt Plugs

L 6.3in x W 5.91in x H 3.54in

External Contactor Module (15A) with blue indication LED follows lights-on for main channel. Use ECMs to switch CO2, fertigation, heating etc. during lights-on or lights-off cycle. ECMs can be positioned close to the actual accessories. Cable outputs with female and male connector allow easy connection of accessories. Contains industrial contactor, suitable to power 15A loads or to power trigger input. Cage clamp connection for control cord allows easy installation.

List Price: $99.95
Our Price: $99.95
Gavita HortiStar 1000 DE Reflector Double Ended Gavita HortiStar 1000 DE Reflector Double Ended

L 20.87in x W 10.24in x H 9.45in

HortiStar 1000 DE has a replaceable Miro aluminum reflector with 95% efficiency. Specifically designed for high frequency electronic ballasts, it has a connection at each side of the lamp, removing the need for a frame wire inside the lamp. For double-ended 1000 watt lamps. The lamp cord terminal is shielded by a metal housing. Comes with 13 ft lamp cord. Installation is very easy with two eye bolts. Lamp not included. Reflector dimensions: 20.1 in long x 9.6 in wide x 7.6 in high.

List Price: $124.95
Our Price: $124.95
Gavita E-Series LED Adapter - 347 Volt including the cable RJ45-RJ45/6 ft Gavita E-Series LED Adapter - 347 Volt including the cable RJ45-RJ45/6 ft

L 15in x W 6in x H 4.5in

The E-Series LED Adapter is designed to be used with the Gavita 1700e LED fixtures. This product runs inline with the power cord to the fixture. Using this device in conjunction with the LED fixture will allow you to control them with an EL series controller. These adapters utilize cables with RJ45 connectors for daisy chaining the control signal between adapters. Please use 906715, 906716 or 906717 for communication with the EL controller. Adapters are cETLus listed as well as IP66 rated for commercial use.


  • Allows for controllability from EL series controllers
  • Rated for commercial use

List Price: $130.00
Our Price: $130.00
Gavita Pro Plus 1000 Watt 400 Volt EL DE (12/Cs) Gavita Pro Plus 1000 Watt 400 Volt EL DE (12/Cs)

L 17in x W 3.2in x H 2.5in

Gavita Pro Plus 1000W EL Double-Ended 400 V lamp is one of the best 1000 watt HPS lamps on the market. Specifically designed for high frequency electronic ballasts, it has a connection at each side of the lamp, removing the need for a frame wire inside the lamp. For use with Gavita fixtures only. The jacket of this double-ended lamp is made from quartz glass. Do not handle with bare hands. Oil from your hands can damage the lamp. Warranty applies only if these lamps are operated with a Gavita Pro series ballast.

List Price: $134.95
Our Price: $134.95
Gavita Replacement Kit for 1000W Lamp and Reflector Gavita Replacement Kit for 1000W Lamp and Reflector

L 16.54in x W 10.04in x H 4.92in

Gavita Pro Plus 1000 watt EL double-ended 400 V lamp is one of the best 1000 watt HPS lamps on the market. Specifically designed for high frequency electronic ballasts, it has a connection at each end of the lamp, removing the need for a frame wire inside the lamp. For use with Gavita fixtures only. The jacket of a double-ended lamp is made from quartz glass. Do not handle with bare hands. Oil from your hands can damage the lamp. Warranty applies only if these lamps are operated with a Gavita Pro series ballast. This DE lamp kit also includes a FREE HR96 reflector.

List Price: $134.95
Our Price: $134.95
Gavita E-Series LED Adapter - 120 - 277 Volt including the cable RJ45-RJ45/6 Ft Gavita E-Series LED Adapter - 120 - 277 Volt including the cable RJ45-RJ45/6 Ft

L 15in x W 6in x H 4.5in

The E-Series LED Adapter is designed to be used with the Gavita 1700e LED fixtures. This product runs inline with the power cord to the fixture. Using this device in conjunction with the LED fixture will allow you to control them with an EL series controller. These adapters utilize cables with RJ45 connectors for daisy chaining the control signal between adapters. Please use 906715, 906716 or 906717 for communication with the EL controller. Adapters are cETLus listed as well as IP66 rated for commercial use.

  • Allows for controllability from EL series controllers
  • Rated for commercial use

List Price: $149.95
Our Price: $149.95
Gavita Booster B200 (10/Cs) Gavita Booster B200 (10/Cs)

L 5.91in x W 6.69in x H 3.54in

The B200 Booster enhances the Master Controller EL1 and EL2 by expanding the number of fixtures controlled. The Gavita Master controllers are equipped with one port allowing growers to control up to 50 fixtures. Adding the B200 Booster, growers can expand their controller to four ports allowing control of up to 200 fixtures. Horticulturists can add additional boosters to expand their systems by 400 or 600 fixtures per controller.

List Price: $244.95
Our Price: $244.95
Gavita Booster B200 (10/Cs) Gavita Booster B200 (10/Cs)

L 5.91in x W 6.69in x H 3.54in

The B200 Booster enhances the Master Controller EL1 and EL2 by expanding the number of fixtures controlled. The Gavita Master controllers are equipped with one port allowing growers to control up to 50 fixtures. Adding the B200 Booster, growers can expand their controller to four ports allowing control of up to 200 fixtures. Horticulturists can add additional boosters to expand their systems by 400 or 600 fixtures per controller.

List Price: $244.95
Our Price: $244.95
Gavita Master Controller EL1F Gavita Master Controller EL1F

L 24in x W 12.5in x H 9.5in

The ELF controllers are new to the family. Not only do they offer everything the Gen 2 controller has to offer in control and safety, but they also provide integrated, intelligent fan control, based on a PID algorithm: 0-10 V EC fan control, intelligent PID fan control, non-volatile memory, event logging, independent sunrise and sunset settings, and independent light cycles on the EL2. With the 0-10 V EC fan control, there is no longer the need to separate high-power speeds controllers to regulate your extraction and intake fans: this little intelligent controller can control them all, more precise, quieter and with better performance. Want to move 1 cf/s or 1000 cf/s, this controller can handle any size EC fan. The wiring system is plug-and-play with all the cables you need already included with each e-series fixture. Whether you control two fixtures or 1000, the Master Controller will do the job. Standard, each output channel can control 40 fixtures (Single Bus e-series) up to 500 fixtures (Repeater Bus e-series), without the addition of booster modules. The EL2F has even more features. On top of the double output ports, you can connect our ECM units which allow you to switch auxiliary equipment, such as CO2 units and heaters, during the lights-on and light-off periods.

List Price: $279.00
Our Price: $279.00
Gavita Master Controller EL1 - Gen 2 Gavita Master Controller EL1 - Gen 2

L 9.65in x W 4.92in x 3.54in

Lighting control at your fingertips! The Master controller EL1 and EL2 Gen 2 are our entry-level systems for centrally controlling large rooms with e-series fixtures. The second generation of Master controllers features improved and expanded functionality that raises the bar including non-volatile memory, event logging, independent sunrise and sunset settings and independent light cycles on the EL2. The EL1 has one lighting control channel and the EL2 has two lighting control channels. The EL1 can control 500 max repeater bus fixtures and 40 max single bus fixtures without a booster. The EL2 can control 1000 max repeater bus fixtures and 80 max single bus fixtures without a booster.

List Price: $279.95
Our Price: $279.95
Gavita Master Controller EL2 - Gen 2 Gavita Master Controller EL2 - Gen 2

L 9.65in x W 4.92in x H 3.54in

Lighting control at your fingertips! The Master controller EL1 and EL2 Gen 2 are our entry-level systems for centrally controlling large rooms with e-series fixtures. The second generation of Master controllers features improved and expanded functionality that raises the bar including non-volatile memory, event logging, independent sunrise and sunset settings and independent light cycles on the EL2. The EL1 has one lighting control channel and the EL2 has two lighting control channels. The EL1 can control 500 max repeater bus fixtures and 40 max single bus fixtures without a booster. The EL2 can control 1000 max repeater bus fixtures and 80 max single bus fixtures without a booster.

List Price: $359.95
Our Price: $359.95
Gavita CMH 315e 208-240 3100k Lamp Gavita CMH 315e 208-240 3100k Lamp

L 15.4in x W 9.9in x H 10in

The Gavita Pro 315e SE is available with the Philips 315 watt 3000° Kelvin lamps (for flowering) or 4200° Kelvin lamps (for vegetative or supplemental use). It is a compact fixture with a new type of reflector mounting system: Instead of a bracket which holds the reflector on both sides, the reflector is now clipped on the ballast housing itself. This reduces size and weight, enables easy replacement and provides optimal positioning and stability of the small reflector. Ideal for fixed installation with brackets on Unistrut (C profile) systems, the Repeater Bus cabling system allows you to daisy-chain the fixtures in your installation. A Repeater Bus interconnect cable is included with every fixture. You can connect 5 strings of 100 fixtures per Master controller port. This enables you to control up to 1000 fixtures on one EL2 controller.


  • The CMH ballasts can be remote controlled by the Gavita Master Controllers.
  • The integration of ballast and reflector results in a compact fixture.
  • All Gavita CMH fixtures are FCC tested and compliant.
  • Compatible with Gavita EL controllers.
  • This reflector is made of Miro® aluminum which provides optimal reflectance to your crop.

List Price: $384.95
Our Price: $384.95
Gavita CMH 315e 208-240 4200k Lamp Gavita CMH 315e 208-240 4200k Lamp

L 15.5in x W 9.8in x H 10in

The Gavita Pro 315e SE is available with the Philips 315 watt 3000° Kelvin lamps (for flowering) or 4200° Kelvin lamps (for vegetative or supplemental use). It is a compact fixture with a new type of reflector mounting system: Instead of a bracket which holds the reflector on both sides, the reflector is now clipped on the ballast housing itself. This reduces size and weight, enables easy replacement and provides optimal positioning and stability of the small reflector. Ideal for fixed installation with brackets on Unistrut (C profile) systems, the Repeater Bus cabling system allows you to daisy-chain the fixtures in your installation. A Repeater Bus interconnect cable is included with every fixture. You can connect 5 strings of 100 fixtures per Master controller port. This enables you to control up to 1000 fixtures on one EL2 controller.


  • The CMH ballasts can be remote controlled by the Gavita Master Controllers.
  • The integration of ballast and reflector results in a compact fixture.
  • All Gavita CMH fixtures are FCC tested and compliant.
  • Compatible with Gavita EL controllers.
  • This reflector is made of Miro® aluminum which provides optimal reflectance to your crop.

List Price: $384.95
Our Price: $384.95
Gavita Pro E-Series SL 1000e DE 208-240 Volt Boxed Gavita Pro E-Series SL 1000e DE 208-240 Volt Boxed

L 23.6in x W 9.9in x H 10.1in

Only 9.7 inch high makes the ‘Slim Line’ the shortest 240 volt Gavita fixture ever. Highest light output and maintenance over time. It has the HR96 reflector for the maximum efficiency and uniformity. Highly efficient passive cooling of ballast for a longer lifetime of the electronics. Sealed housing with Gore-Tex® ventilation plug and controllable output up to 1150 Watt. Equipped with Repeater Bus interface which is a double-port connector on the ballast that allows you to directly daisy chain 100 fixtures per string and five strings per controller port to connect a maximum of 500 fixtures per controller port.

List Price: $431.95
Our Price: $431.95
Gavita Pro 6/750e DE 277-347 Volt US HR96 Bulk Gavita Pro 6/750e DE 277-347 Volt US HR96 Bulk

L 22.2in x W 9.7in x H 7.8in

These are packaged bulk for commercial applications and sold in increments of 70 (1/2 pallet). If you equip a larger operation, working on the North American 3 phase systems, you now have the choice of remotely controlling your lights with our Gavita Master controllers. We designed new, multi-voltage electronics to either work with the US 480 V or the Canadian 600 V WYE 3 phase installations, enabling much lower installation costs, more efficient electricity use and ease of installation. Running on a higher voltage (277V or 347 V phase-neutral) these fixtures use less power and are more compact than traditional consumer 120-240V fixtures. The compact fixture contains a lamp, HR96 reflector or W 150 DE for wide configurations and horticultural quality ballast in one comprehensive package. The HR96 DE for overlapping configurations, assuring optimal uniformity and penetration. The W 150 DE for wide configurations, where uniformity and lower light levels are required in large rooms. The fixture’s light source is a Gavita Pro Plus 750 watt double ended HPS lamp, generating 1450 µmol s-1 of light. With a light maintenance of over 96% per 5000 hours you only need to replace it once a year. 1 year warranty on the lamp. This professional fixture requires installation by a certified electrician in an industrial environment. Customer must select cord and mounting options.

List Price: $447.95
Our Price: $447.95
Gavita Pro E-Series 6/750e DE Flex 120-240 Volt - Boxed Gavita Pro E-Series 6/750e DE Flex 120-240 Volt - Boxed

L 23.62in x W 10.04in x H 12.4in

The new Gavita 6/750e watt 400 V EL DE lamp has an efficiency of 2 µmol s-1 per watt in a wide control range of 600-825 watt. Now that is flexibility! At 825 watt it rivals air cooled 1000 watt HPS fixtures with an output of 1650 µmol s-1, while outshining the best 600 watt lamps at 600 watt. When necessary it can be dimmed down to 375 watt. Our HR96 reflector is made of a very high grade Miro aluminum which provides optimal reflectance of light to your crop. This is the reflector provides uniform light in an overlapping plan with great plant penetration from all sides. The reflector is a medium wide reflector, providing optimal horizontal penetration of the crop. Of course it is suitable for the Gavita Master Controller, eliminating the need for timers and contactors. This fixture is suitable for lighting a 15 sq ft area with 1000 µmol s-1 m-2. Unit includes a 240 V power cord. A 120 V cord can be purchased separately. This professional fixture requires installation by a certified electrician in an industrial environment.1 year warranty on the lamp.

List Price: $447.95
Our Price: $447.95
Gavita Pro Classic Series 1000 DE - 277-347 Volt - Bulk Gavita Pro Classic Series 1000 DE - 277-347 Volt - Bulk

L 22.2in x W 9.7in x H 7.8in

Professional 1000 watt high frequency electronic ballast. Including high efficiency Miro aluminum horticultural HortiStar HR96 reflector (95% efficiency). Includes 1000 watt double-ended EL lamp. Microprocessor controlled with electronic safety circuit. Very low heat dissipation and very low weight. Only suitable for use with 1000 watt double-ended EL lamps. No acoustic resonance, more than 10% grow light compared to traditional lamps and light maintenance after 5000 hrs >95%. Electronics by Gavita. Driver efficiency >95%. Sealed housing with Gore-Tex ventilation plug. Reflector is easily replaceable. These are packaged bulk for commercial applications and sold in increments of 70 (1/2 pallet). 1 year warranty on the lamp. Customer must select cord and mounting options.

List Price: $447.95
Our Price: $447.95
Gavita Pro E-Series 6/750e DE Flex 277-347 Volt Boxed (56/Plt) Gavita Pro E-Series 6/750e DE Flex 277-347 Volt Boxed (56/Plt)

L 23.5 in x W 10in x H 12.2in

The new Gavita 6/750e watt 400 V EL DE lamp has an efficiency of 2 µmol s-1 per watt in a wide control range of 600-825 watt. Now that is flexibility! At 825 watt it rivals air cooled 1000 watt HPS fixtures with an output of 1650 µmol s-1, while outshining the best 600 watt lamps at 600 watt. When necessary it can be dimmed down to 375 watt. Our HR96 reflector is made of a very high grade Miro aluminum which provides optimal reflectance of light to your crop. This is the reflector provides uniform light in an overlapping plan with great plant penetration from all sides. The reflector is a medium wide reflector, providing optimal horizontal penetration of the crop. Of course it is suitable for the Gavita Master Controller, eliminating the need for timers and contactors. This fixture is suitable for lighting a 15 sq ft area with 1000 µmol s-1 m-2. Operates at 277-347 V. This professional fixture requires installation by a certified electrician in an industrial environment.1 year warranty on the lamp.

List Price: $464.95
Our Price: $464.95
Gavita Pro E-Series 1000e DE 277-347 Volt - Bulk Gavita Pro E-Series 1000e DE 277-347 Volt - Bulk

L 22.9in x W 10in x H 9.3in

These are packaged bulk for commercial applications and sold in increments of 70 (1/2 pallet). The E-series Pro 1000e DE is the newest flagship model, now available in 277-347 volt. The E-series Pro 1000e DE Gavita comes with a Gavita Pro Plus 2,100 µmol, 1000 watt DE lamp. These fixture are equipped with what we call the Gavita repeater bus. The Gavita repeater bus solution allows you to daisy chain your controller cables from one fixture directly to the other. Each fixture has an input and an output, buffering the signal for the next fixture. This allows us to put 100 fixtures in one daisy chain. On each controller port you can connect 5 chains with 100 fixtures. The compact fixture contains a lamp, HR96 reflector or W 150 DE for wide configurations and horticultural quality ballast in one comprehensive package. The HR96 DE for overlapping configurations, assuring optimal uniformity and penetration. The W 150 DE for wide configurations, where uniformity and lower light levels are required in large rooms. 1 year warranty on the lamp. This professional fixture requires installation by a certified electrician in an industrial environment. Customer must select cord and mounting options.

List Price: $464.95
Our Price: $464.95
Gavita Electronic 1000e DE 277-347 Volt w/ W 150 Reflector Bulk Gavita Electronic 1000e DE 277-347 Volt w/ W 150 Reflector Bulk

L 22.83in x W 10.03in x H 9.45in

These are packaged bulk for commercial applications and sold in increments of 70 (1/2 pallet). The E-series Pro 1000e DE is the newest flagship model, now available in 277-347 volt. The E-series Pro 1000e DE Gavita comes with a Gavita Pro Plus 2,100 µmol, 1000 watt DE lamp. These fixture are equipped with what we call the Gavita repeater bus. The Gavita repeater bus solution allows you to daisy chain your controller cables from one fixture directly to the other. Each fixture has an input and an output, buffering the signal for the next fixture. This allows us to put 100 fixtures in one daisy chain. On each controller port you can connect 5 chains with 100 fixtures. The compact fixture contains a lamp, HR96 reflector or W 150 DE for wide configurations and horticultural quality ballast in one comprehensive package. The HR96 DE for overlapping configurations, assuring optimal uniformity and penetration. The W 150 DE for wide configurations, where uniformity and lower light levels are required in large rooms. 1 year warranty on the lamp. This professional fixture requires installation by a certified electrician in an industrial environment. Customer must select cord and mounting options.


List Price: $464.95
Our Price: $464.95
Gavita Pro E-Series 1000e DE 277 - 347 Volt w/ HR96 Reflector - Boxed Gavita Pro E-Series 1000e DE 277 - 347 Volt w/ HR96 Reflector - Boxed

L 23.3in x W 10.3in x H 8.8in

The E-series Pro 1000e DE is the newest flagship model, now available in 277-347 volt. The E-series Pro 1000e DE Gavita comes with a Gavita Pro Plus 2,100 µmol, 1000 watt DE lamp. These fixture are equipped with what we call the Gavita repeater bus. The Gavita repeater bus solution allows you to daisy chain your controller cables from one fixture directly to the other. Each fixture has an input and an output, buffering the signal for the next fixture. This allows us to put 100 fixtures in one daisy chain. On each controller port you can connect 5 chains with 100 fixtures. All E-series fixtures are plug and play installable and come with the control cords to daisy chain them to the controller. Master Controller are sold separately. The compact complete fixture contains a lamp, HR96 reflector and horticultural quality ballast in one comprehensive package. The higher output and added efficiency of the industry standard HR96 reflector make this the workhorse of the family. It also includes 3 ft/1 m power cord is not attached and has an open wire end, eye bolts and nuts for hanging and 6.5 ft interconnect repeater bus cables. 1 year warranty on the lamp. This professional fixture requires installation by a certified electrician in an industrial environment.

List Price: $481.95
Our Price: $481.95
Gavita Pro w/ Philips Ballast 1000 Watt 347 Volt w/ HR96 Reflector Bulk Gavita Pro w/ Philips Ballast 1000 Watt 347 Volt w/ HR96 Reflector Bulk

L 9.8in x W 7.8in x H 10.5in

The 1000 watt double-ended lamp is the most efficient HPS lamp on the market. The Gavita housing keeps the electronics cool, significantly reducing the possibility of faults and extending its operating life. In independent tests, the Electronic fixture came out as the coolest. The compact fixture contains a lamp, HR96 reflector or W 150 DE for wide configurations and horticultural quality ballast in one comprehensive package. The HR96 DE for overlapping configurations, assuring optimal uniformity and penetration. The W 150 DE for wide configurations, where uniformity and lower light levels are required in large rooms. The Gavita Electronic DE #906029 comes with a Gavita Pro Plus 2,100 µmol, 1000 watt DE lamp. This professional fixture requires installation by a certified electrician in an industrial environment. 1 year warranty on the lamp. Customer must select cord and mounting options.


List Price: $514.95
Our Price: $514.95
Gavita Pro E-Series 6/750e DE 277-347 Volt w/ W150 Reflector Bulk Gavita Pro E-Series 6/750e DE 277-347 Volt w/ W150 Reflector Bulk

L 22.2in x W 9.7in x H 7.8in

These are packaged bulk for commercial applications and sold in increments of 70 (1/2 pallet). If you equip a larger operation, working on the North American 3 phase systems, you now have the choice of remotely controlling your lights with our Gavita Master controllers. We designed new, multi-voltage electronics to either work with the US 480 V or the Canadian 600 V WYE 3 phase installations, enabling much lower installation costs, more efficient electricity use and ease of installation. Running on a higher voltage (277V or 347 V phase-neutral) these fixtures use less power and are more compact than traditional consumer 120-240V fixtures. The compact fixture contains a lamp, HR96 reflector or W 150 DE for wide configurations and horticultural quality ballast in one comprehensive package. The HR96 DE for overlapping configurations, assuring optimal uniformity and penetration. The W 150 DE for wide configurations, where uniformity and lower light levels are required in large rooms. The fixture’s light source is a Gavita Pro Plus 750 watt double ended HPS lamp, generating 1450 µmol s-1 of light. With a light maintenance of over 96% per 5000 hours you only need to replace it once a year. 1 year warranty on the lamp. This professional fixture requires installation by a certified electrician in an industrial environment. Customer must select cord and mounting options.

List Price: $569.95
Our Price: $569.95
Gavita CMH 630e 208-240 3100k Lamp Gavita CMH 630e 208-240 3100k Lamp

L 23.6in x W 9.9in x H 12.2in

The Gavita Pro 630e SE is available with the Philips 315 watt 3000° Kelvin lamps (for flowering) or 4200° Kelvin lamps (for vegetative or supplemental use). The fixture is equipped with the M 132 SE CMH630 reflector (medium, 132 degrees beam angle, for double CDM 315 fixtures). The medium reflector is designed for CMH only installations and will give you over 90% uniformity on your crop with an optimal horizontal penetration of the crop. The Repeater Bus interface enables external control with the Gavita Master controllers. The Pro 630e CMH contains two 315W CMH lamps. We use an intelligent double ballast concept, enabling to switch off one lamp in the fixture. To make sure that both lamps have equal burning hours and to balance light on the crop, we alternate which lamp is switched off every time an autodim event occurs or when you dim down to a low level.

  • The CMH ballasts can be remote controlled by the Gavita Master Controllers.
  • The integration of ballast and reflector results in a compact fixture.
  • All Gavita CMH fixtures are FCC tested and compliant.
  • Compatible with Gavita EL controllers.
  • This reflector is made of Miro® aluminum which provides optimal reflectance to your crop.

List Price: $599.95
Our Price: $599.95
Gavita Pro CMH 630e 208-240 Volt Gavita Pro CMH 630e 208-240 Volt

L 23.6in x W 9.9in x H 12.2in

The Gavita Pro 630e SE is available with the Philips 315 watt 3000° Kelvin lamps (for flowering) or 4200° Kelvin lamps (for vegetative or supplemental use). The fixture is equipped with the M 132 SE CMH630 reflector (medium, 132 degrees beam angle, for double CDM 315 fixtures). The medium reflector is designed for CMH only installations and will give you over 90% uniformity on your crop with an optimal horizontal penetration of the crop. The Repeater Bus interface enables external control with the Gavita Master controllers. The Pro 630e CMH contains two 315W CMH lamps. We use an intelligent double ballast concept, enabling to switch off one lamp in the fixture. To make sure that both lamps have equal burning hours and to balance light on the crop, we alternate which lamp is switched off every time an autodim event occurs or when you dim down to a low level.

  • The CMH ballasts can be remote controlled by the Gavita Master Controllers.
  • The integration of ballast and reflector results in a compact fixture.
  • All Gavita CMH fixtures are FCC tested and compliant.
  • Compatible with Gavita EL controllers.
  • This reflector is made of Miro® aluminum which provides optimal reflectance to your crop.

List Price: $599.95
Our Price: $599.95
Gavita Pro 270e LEP Gavita Pro 270e LEP

L 24.8in x W 13in x H 9.8in

Harness the power of the sun with the Gavita Pro 270e LEP. This fixture utilizes a new emitter that allows for a more compact fixture design. When it comes to lighting plants you need both quantity and quality. To further optimize the quality of your crop we introduced supplemental plasma light. lt adds everything to HPS light your plant needs to bring it to the next level, including UVB and UVA. There is no light source like it. The Pro 270e LEP is equipped with a Master Controller input to be able to switch the fixture on and off together with your HPS e-series fixtures. Now you can centrally control your HPS and plasma fixtures with one simple push of a button: switch, dim and boost your HPS fixtures and switch your LEP fixtures. The LEP 41.01 Sup is the perfect supplemental light to combine with HPS in any stage of plant growth. Only use the full spectrum LEP (41.02 GROW) for high quality sunlight simulation, for example for preserving genetics. #906090 & #906092 are suitable for 120-240 V. Supplied with 240 V 8 ft cord with NEMA 6-15 plug, 120 V Nema 5-15 available separately. #906100 & 906102 come with 3 ft/100 cm power cord (6 and 10 ft power cord available) that is not attached and has an open wire end. Mounting brackets and power cord are included, but not in the box.

List Price: $899.95
Our Price: $899.95
Gavita Pro 270e LEP Sup (41.01 emitter) 277 Volt Gavita Pro 270e LEP Sup (41.01 emitter) 277 Volt

L 24.8in x W 12.8in x H 12.4in

Harness the power of the sun with the Gavita Pro 270e LEP. This fixture utilizes a new emitter that allows for a more compact fixture design. When it comes to lighting plants you need both quantity and quality. To further optimize the quality of your crop we introduced supplemental plasma light. lt adds everything to HPS light your plant needs to bring it to the next level, including UVB and UVA. There is no light source like it. The Pro 270e LEP is equipped with a Master Controller input to be able to switch the fixture on and off together with your HPS e-series fixtures. Now you can centrally control your HPS and plasma fixtures with one simple push of a button: switch, dim and boost your HPS fixtures and switch your LEP fixtures. The LEP 41.01 Sup is the perfect supplemental light to combine with HPS in any stage of plant growth. Only use the full spectrum LEP (41.02 GROW) for high quality sunlight simulation, for example for preserving genetics. #906090 & #906092 are suitable for 120-240 V. Supplied with 240 V 8 ft cord with NEMA 6-15 plug, 120 V Nema 5-15 available separately. #906100 & 906102 come with 3 ft/100 cm power cord (6 and 10 ft power cord available) that is not attached and has an open wire end. Mounting brackets and power cord are included, but not in the box.

List Price: $899.95
Our Price: $899.95
Gavita Pro 270e LEP Grow (41.02 emitter) 277 Volt Gavita Pro 270e LEP Grow (41.02 emitter) 277 Volt

L 24.8in x W 12.8in x H 12.4in

Harness the power of the sun with the Gavita Pro 270e LEP. This fixture utilizes a new emitter that allows for a more compact fixture design. When it comes to lighting plants you need both quantity and quality. To further optimize the quality of your crop we introduced supplemental plasma light. lt adds everything to HPS light your plant needs to bring it to the next level, including UVB and UVA. There is no light source like it. The Pro 270e LEP is equipped with a Master Controller input to be able to switch the fixture on and off together with your HPS e-series fixtures. Now you can centrally control your HPS and plasma fixtures with one simple push of a button: switch, dim and boost your HPS fixtures and switch your LEP fixtures. The LEP 41.01 Sup is the perfect supplemental light to combine with HPS in any stage of plant growth. Only use the full spectrum LEP (41.02 GROW) for high quality sunlight simulation, for example for preserving genetics. #906090 & #906092 are suitable for 120-240 V. Supplied with 240 V 8 ft cord with NEMA 6-15 plug, 120 V Nema 5-15 available separately. #906100 & 906102 come with 3 ft/100 cm power cord (6 and 10 ft power cord available) that is not attached and has an open wire end. Mounting brackets and power cord are included, but not in the box.

List Price: $899.95
Our Price: $899.95