Use these strong stainless steel V-shaped hanger hooks to suspend most Hydrofarm reflectors (with the exception of models having integrated hangers) and PARsource GLS and GLX reflectors.

T5 Strip Hanging Fixture Clip

These sturdy wire hangers are replacements for the hangers included with all Agrobrite Designer T5 fixtures (FLP series). They can also be used with FLT series fixtures.

This 16/3 600V Male Lock & Seal receptacle replaces the male end of a cordset and attaches that cordset to a BAREF, female Lock & Seal receptacle. Male ends of cordsets may occasionally suffer damange from arcing. Also, DIY grow room constructors will find this part essential for wiring a new cordset into an existing reflector.

Heavy duty adapter that is the ideal solution for safely creating three additional outlets. You can change any single power outlet or any extension cord into 3 standard U-ground outlets when needed.

Drive Wheel O-Ring Kit (Tension Spring, O-Ring, Nut, Bolt) Includes a black rubber wheel, tension spring and one bolt

This commercial grade duplex receptacle is ideal for the DIY grow room enthusiast. Whether you're starting on a fresh setup or repairing/replacing an existing area, this 240V/15A UL listed input receptacle helps you wire with two outputs.

This commercial grade Duplex 120V/240V, 15A X-receptacle is ideal for the DIY grow room enthusiast. Whether you're starting on a fresh setup or replacing outlets in an existing area, this 120V/240V receptacle helps you get wired up.

Xtrasun ballast power cord. Can be used as replacement power cord. 8' 120V 16/3 power cord, NEMA 5-15P plug, IEC C13 non-notched receptacle.

The BAASR receptacle adapts a Hydrofarm ballast to a "Brand S"fixture/cord set

We offer a full range of power supply cords as well as adapters to switch from Hydrofarm ballasts to other brands of reflectors, or from Hydrofarm reflectors to other brands of ballasts. We also offer extension cords for your convenience, but keep in mind that some high intensity light systems may not work at long lamp cord lengths due to ignitor range restrictions. If you have any questions, please consult your sales representative.

Light Rail 3.0/3.5/4.0 stop screw with thumb nut

Light Rail 3.5 is rated to 35 lbs
Light Rail 5.0 is rated to 100 lbs

The BAASP plug adapts a Hydrofarm fixture/cord set to a "Brand S" ballast

We offer a full range of power supply cords as well as adapters to switch from Hydrofarm ballasts to other brands of reflectors, or from Hydrofarm reflectors to other brands of ballasts. We also offer extension cords for your convenience, but keep in mind that some high intensity light systems may not work at long lamp cord lengths due to ignitor range restrictions. If you have any questions, please consult your sales representative.

• 8' Notched Ballast Power Cord 14/3 120v

• 120v power supply cord for Powerhouse -

• Notched design matches 120v input.

We offer a full range of power supply cords as well as adapters to switch from Hydrofarm ballasts to other brands of reflectors, or from Hydrofarm reflectors to other brands of ballasts. We also offer extension cords for your convenience, but keep in mind that some high intensity light systems may not work at long lamp cord lengths due to ignitor range restrictions. If you have any questions, please consult your sales representative.

5' Lock & Seal Lamp Cord Extension

We offer a full range of power supply cords as well as adapters to switch from Hydrofarm ballasts to other brands of reflectors, or from Hydrofarm reflectors to other brands of ballasts. We also offer extension cords for your convenience, but keep in mind that some high intensity light systems may not work at long lamp cord lengths due to ignitor range restrictions.

3-foot extension rail to extend a six-foot rail system to nine feet. 3 alignment pins & necessary mounting hardware included.

15' 16/3 600V Male Lock & Seal Cord UL

We offer a full range of power supply cords as well as adapters to switch from Hydrofarm ballasts to other brands of reflectors, or from Hydrofarm reflectors to other brands of ballasts. We also offer extension cords for your convenience, but keep in mind that some high intensity light systems may not work at long lamp cord lengths due to ignitor range restrictions. If you have any questions, please consult your sales representative.

20' Ballast Power Cord 16/3 240V

We offer a full range of power supply cords as well as adapters to switch from Hydrofarm ballasts to other brands of reflectors, or from Hydrofarm reflectors to other brands of ballasts. We also offer extension cords for your convenience, but keep in mind that some high intensity light systems may not work at long lamp cord lengths due to ignitor range restrictions

Get connected! This extension cord extends your reach -- freeing you up from inconvenient outlets placed around your grow room or work room. The strong, sturdy cord is made to stand up to all kinds of environments, ensuring that your power keeps running when you need it most.

Features

14 gauge cord with grounded 120V plug for maximum safety
Heavy-duty molded outlet for longer life
12 ft
15 amp
3 outlet
Indoor use only
1800 maximum watts
UL listed

15' Lock & Seal Lamp Cord Extension

We offer a full range of power supply cords as well as adapters to switch from Hydrofarm ballasts to other brands of reflectors, or from Hydrofarm reflectors to other brands of ballasts. We also offer extension cords for your convenience, but keep in mind that some high intensity light systems may not work at long lamp cord lengths due to ignitor range restrictions. If you have any questions, please consult your sales representative.

Auxilliary Trolley for LR3.5 (Slave Trolley)

The Apollo® 9 - 24 hr digital timer is the perfect timing solution for your hydro systems. With two outlets and a 15 Amp capacity, it's easy to set to run your pumps, fans, etc. The Apollo® 9 may be set to 1 min intervals and run 8 separate schedules per day. It can be configured in numerous timing schedules to meet the most demanding timing requirements. Two (2) outlets with 1 min intervals. Battery backup feature saves settings if power goes out. Enclosure resists dust, rust and moisture. 15 Amps maximum/120 V/60 Hz.

25' Lock & Seal Lamp Cord Extension

We offer a full range of power supply cords as well as adapters to switch from Hydrofarm ballasts to other brands of reflectors, or from Hydrofarm reflectors to other brands of ballasts. We also offer extension cords for your convenience, but keep in mind that some high intensity light systems may not work at long lamp cord lengths due to ignitor range restrictions.

Get connected! This extension cord extends your reach -- freeing you up from inconvenient outlets placed around your grow room or work room. The strong, sturdy cord is made to stand up to all kinds of environments, ensuring that your power keeps running when you need it most.

Features

14 gauge cord with grounded 120V plug for maximum safety
Heavy-duty molded outlet for longer life
25 ft
15 amp
3 outlet
Indoor use only
1800 maximum watts
UL listed

EXTREME DUTY TROLLEY WHEELS, for LightRail 3.0, 3.5 and 4.0.

A suggested upgrade item for moving multiple lights and/or overweight loads such as heavier LED, plasma, or any light with an internal ballast weighing 35 pounds or more.

They are engineered with steel on steel ball bearing with a nylon over molded tire for smooth quiet operation. Rated up to 60 lbs per set and comes with a lifetime warranty

Photosynthesis & Plant Growth depend on the sun or specially designed lighting systems. But of that light reaching the plant, only specific types of energy (in the lighting spectrum) drive the photosynthesis process. Since light is the most important single factor affecting your plants' life cycles, quality light meters are an essential tool in determining accurately if your crop is receiving the maximum light needed for healthy growth. A light meter allows commercial growers an accurate means of adapting to their plants' needs as the light conditions change during a full growing season.

• Identify best light level of healthy plants
• Easy to use hand-held design
• Get precise reading with two scales
• Includes instructions and "Consumer's Guide to Light Gardening" brochure
• Lifetime silicon sensor - no batteries required
• Read up to 5000 footcandles of sun, high intensity or fluorescent light
• Exclusive "Zero" calibration feature - accurate to 2%
• Full two year warranty - the longest in the industry

Get connected! This extension cord extends your reach -- freeing you up from inconvenient outlets placed around your grow room or work room. The strong, sturdy cord is made to stand up to all kinds of environments, ensuring that your power keeps running when you need it most.

Features

14 gauge cord with grounded 240V plug for maximum safety
Heavy-duty molded outlet for longer life
12 ft
15 amp
3 outlet
Indoor use only
3600 maximum watts

Add A Lamp Hardware Kit (trolley and mounting hardware)

Adjustable lamp attaching device that positions, balances, and stabilizes your lamp as you mount it to your Light Rail.

6' Add A Lamp Slave (6' Push Rod/6' Rail)

• Measures grow lights or sunlight
• Measures up to 5000 footcandles
• 3 scales for precise readings
• Convenient hand-held remote sensor
• Lifetime silicon cell - includes battery, informative booklet with lighting recommendations and carrying case

LRAALSYS

Includes:

• LRAAI3.5 -A six-foot rail and a six-foot pushrod
• LRAALHDWARE - One auxiliary trolley and a hardware pack (screws, nuts, and a zip tie)

L 10.6in x W 3.6in x H 52.4in

The Fast Fit® Trellis Support System securely and easily attaches to your Fast Fit® tray stands. Made of the same great quality materials with heavy-duty 1 in box steel that is powder-coated for durability. Each pole measures 4 ft in height and comes with six different hanging hook heights for maximum flexibility. Trellis netting can be secured horizontally or vertically. Four-pole works with #706120, #706121 & #706122 tray stands. Six-pole works with #706135 & #706124 tray stands. Trellis netting not included.

Light Rail 5 Add-A-Bar Kit

The new Light Rail 5 is great for multiple reflectors. 90+ lb. capacity if properly balanced. The new Light Rail 5 is extremely heavy-duty and functional. Comes with an adjustable crossbar, 8' rail, and a high torque 4 RPM motor.

Kit Contains:
Adjustable Crossbar (81”, 87”, 93”)
Light Rail 5 Auxiliary Trolley
Sectioned Push-Pull Rod
Mounting Hardware
Instructions

10 RPM Intelli-drive motor w/ 0-60 sec. time delay, adjustable from 0 - 60 sec.

10 RPM intelli-drive motor (LR3.5ID9) w/6' rail plus mounting hardware

For a rectangular growing area, a linear lamp moving system is preferable. The self propelled Light Rail 3.5 Intelli Drive is without question, the finest linear lamp-mover available. It uses no pulleys, chains or gears. Simply mount the standard 6 foot track over the desired area and place the lamp-moving drive motor onto the track. The Light Rail 3.5 Intelli Drive is supplied with adjustable switch stops, so lamp travel can be any length you wish. This is perfect for a start-up size garden through to a full growth garden. The standard 6-foot track may also be extended. Light Rail 3.5 comes with a 2 Year Factory Warranty.

Adjust-a-Drive MOTOR ONLY

The all new LightRail 4.0 AdjustaDrive is the newest linear light mover available from Gualala Robotics Inc.

For a rectangular growing area, a linear lamp moving system is preferable. The self propelled Light Rail 4.0 Adjust-a-Drive is without question, the finest linear lamp-mover available. It uses no pulleys, chains or gears. Simply mount the standard 6 foot track over the desired area and place the lamp-moving drive motor onto the track. The Light Rail 4.0 Adjust-a-Drive is supplied with adjustable switch stops, so lamp travel can be any length you wish. This is perfect for a start-up size garden through to a full growth garden. The standard 6 foot track may also be extended. Light Rail 4.0 comes with a 2 Year Factory Warranty.

With both a 0 to 60 second adjustable time delay for promoting even growth from end to end, and a two to four feet per minute adjustable speed that covers a wide range of lamp intensities and travel distances. The all new LightRail 4 AdjustaDrive from Gualala Robotics Inc., designed and manufactured in the USA and is the ultimate in light mover control and is compatible with all LightRail 3.0 and 3.5 rails and accessory items.

Light Rail 4.0 is rated to 35 lbs
Light Rail 5.0 is rated to 100 lbs

RPM is adjustable from 6 RPM (2 ft/min) to 10 RPM (4 ft/min)

For a rectangular growing area, a linear lamp moving system is preferable. The self propelled Light Rail 3.5 Intelli Drive is without question, the finest linear lamp-mover available. It uses no pulleys, chains or gears. Simply mount the standard 6 foot track over the desired area and place the lamp-moving drive-motor onto the track. The Light Rail 3.5 Intelli Drive is supplied with adjustable switch stops, so lamp travel can be any length you wish. This is perfect for a start-up size garden through to a full growth garden. The standard 6 foot track may also be extended. These complete kits are available in either 6 RPM or 9 RPM models.

Light Rail works great with all reflectors!

The all new LightRail 4.0 Adjust-a-Drive is the newest linear light mover available from Gualala Robotics Inc. With both a 0 to 60 second adjustable time delay for promoting even growth from end to end, and a two to four feet per minute adjustable speed that covers a wide range of lamp intensities and travel distances. The all new LightRail 4 AdjustaDrive from Gualala Robotics Inc., designed and manufactured in the USA and is the ultimate in light mover control and is compatible with all LightRail 3.0 and 3.5 rails and accessory items.

Adjust-a-drive motor w/6' rail plus mounting hardware

The all new LightRail 4.0 AdjustaDrive is the newest linear light mover available from Gualala Robotics Inc.

For a rectangular growing area, a linear lamp moving system is preferable. The self propelled Light Rail 4.0 Adjust-a-Drive is without question, the finest linear lamp-mover available. It uses no pulleys, chains or gears. Simply mount the standard 6 foot track over the desired area and place the lamp-moving drive motor onto the track. The Light Rail 4.0 Adjust-a-Drive is supplied with adjustable switch stops, so lamp travel can be any length you wish. This is perfect for a start-up size garden through to a full growth garden. The standard 6 foot track may also be extended. Light Rail 4.0 comes with a 2 Year Factory Warranty.

With both a 0 to 60 second adjustable time delay for promoting even growth from end to end, and a two to four feet per minute adjustable speed that covers a wide range of lamp intensities and travel distances. The all new LightRail 4 AdjustaDrive from Gualala Robotics Inc., designed and manufactured in the USA and is the ultimate in light mover control and is compatible with all LightRail 3.0 and 3.5 rails and accessory items.

Light Rail 4.0 is rated to 35 lbs
Light Rail 5.0 is rated to 100 lbs

RPM is adjustable from 6 RPM (2 ft/min) to 10 RPM (4 ft/min)

LightRail 4.20 AdjustaDrive Kit comes complete with a variable speed LightRail 4.0 AdjustaDrive Motor, a two-piece 2 meter (6’6”) Rail, an Add A Lamp Kit with another 2-meter Rail, Push/Pull Rod, Auxiliary Trolley, instructions and hardware for moving two lights with the enclosed Motor. In addition, this indoor grow Kit comes with pre-installed Extreme Duty Trolley Wheels rated to 60 lbs, and these wheels have a lifetime warranty! Move two lights along 4 meters (12’) of Rail and all from one Kit box – the LightRail 4.20 – With both a 0 to 60 second adjustable time delay for promoting even growth from end to end plus the added feature of two to four feet per minute adjustable speed control that covers a wide range of lamp intensities and travel distances, LightRail 4.20 is great for customers who want that additional control. LightRail 4.20 will move any grow lights/ any hoods, multiple sizes and weights and is a scalable system where up to three indoor grow lights can move in-line with the use of one Motor. LightRail is just right for any indoor grow equipment set up including indoor grow light systems, seasonal greenhouse lighting, all season greenhouse grow lights, grow tent set ups and commercial grower facilities.

Light Rail 5, Motor, Crossbar, 8' Rail

The new Light Rail 5 is great for multiple reflectors. 90+ lb. capacity if properly balanced. The new Light Rail 5 is extremely heavy-duty and functional. Comes with an adjustable crossbar, 8' rail, and a high torque 4 RPM motor.

From the all new "triple duty" extruded aluminum track, super "wide-n-stable" carriage with steel on steel carrier bearings, to the high torque instrument grade drive motor with ball bearing output shaft and "sure grip" dual drive design. The new Light Rail 5 ismore than capable of moving 2 or 3 lamps, side by side or fore and aft.