Use these strong stainless steel V-shaped hanger hooks to suspend most Hydrofarm reflectors (with the exception of models having integrated hangers) and PARsource GLS and GLX reflectors.

T5 Strip Hanging Fixture Clip

These sturdy wire hangers are replacements for the hangers included with all Agrobrite Designer T5 fixtures (FLP series). They can also be used with FLT series fixtures.

Drive Wheel O-Ring Kit (Tension Spring, O-Ring, Nut, Bolt) Includes a black rubber wheel, tension spring and one bolt

Light Rail 3.0/3.5/4.0 stop screw with thumb nut

Light Rail 3.5 is rated to 35 lbs
Light Rail 5.0 is rated to 100 lbs

3-foot extension rail to extend a six-foot rail system to nine feet. 3 alignment pins & necessary mounting hardware included.

Sky Hooks® are manufactured by the original Sun Grip® factory. Their proven reliability and ease of use has made them the leader in the Light Hanging category. Sky Hooks® are an economical version of the Sun Grips®, with a slightly reduced weight capacity. Their patented system pulls tight, locks in place and, when used as directed, will never break, slip or rust. Heat and cold resistant. 8 ft braided polypropylene rope. Carabiner clips provide secure hold. Great for hoisting or securing reflectors, light fixtures, smaller carbon filters and ventilation equipment. Maximum weight capacity is 40 lbs each (80 lbs per pair).

L 2in x W 4.4in x H 7in

Sun Grip® Light Hangers allow you to secure items quickly and easily. New improved design with a simple push button release. Sun Grip's patented system pulls tight, locks in place, will never break or slip and will not rust. Made with special composite material. Heat and cold resistant. 8 ft braided polypropylene rope. Carabiner clips provide a secure hold. Great for hoisting or securing reflectors, light fixtures, carbon filters and ventilation equipment. Maximum weight capacity is 75 lbs each (150 lbs a pair). Excellent for use with our larger reflectors like the Magnum XXXL® or the Epic Reflector®.

Sun Grip® Light Hangers allow you to secure items quickly and easily. New improved design with a simple push button release. Sun Grip's patented system pulls tight, locks in place, will never break or slip and will not rust. Made with special composite material. Heat and cold resistant. 8 ft braided polypropylene rope. Carabiner clips provide a secure hold. Great for hoisting or securing reflectors, light fixtures, carbon filters and ventilation equipment. Maximum weight capacity is 75 lbs each (150 lbs a pair). Excellent for use with our larger reflectors like the Magnum XXXL® or the Epic Reflector®.

Auxilliary Trolley for LR3.5 (Slave Trolley)

EXTREME DUTY TROLLEY WHEELS, for LightRail 3.0, 3.5 and 4.0.

A suggested upgrade item for moving multiple lights and/or overweight loads such as heavier LED, plasma, or any light with an internal ballast weighing 35 pounds or more.

They are engineered with steel on steel ball bearing with a nylon over molded tire for smooth quiet operation. Rated up to 60 lbs per set and comes with a lifetime warranty

Add A Lamp Hardware Kit (trolley and mounting hardware)

6' Add A Lamp Slave (6' Push Rod/6' Rail)

#1) Fast Fit® Components: Caster wheels: 4 pc (#706133 - can support up to 240 lbs) or 6 pc (#706134 - can support up to 360 lbs). #2) Light Stand 4 ft Uprights (#706125). #3) Extension Kit raises your light hanging bars (#706131). #4) Light Stand Crossbar (#706130). #5) Sturdy hanging bar comes in 2 ft, 3 ft and 4 ft sizes

LRAALSYS

Includes:

• LRAAI3.5 -A six-foot rail and a six-foot pushrod
• LRAALHDWARE - One auxiliary trolley and a hardware pack (screws, nuts, and a zip tie)

#1) Fast Fit® Components: Caster wheels: 4 pc (#706133 - can support up to 240 lbs) or 6 pc (#706134 - can support up to 360 lbs). #2) Light Stand 4 ft Uprights (#706125). #3) Extension Kit raises your light hanging bars (#706131). #4) Light Stand Crossbar (#706130). #5) Sturdy hanging bar comes in 2 ft, 3 ft and 4 ft sizes

L 10.6in x W 3.6in x H 52.4in

The Fast Fit® Trellis Support System securely and easily attaches to your Fast Fit® tray stands. Made of the same great quality materials with heavy-duty 1 in box steel that is powder-coated for durability. Each pole measures 4 ft in height and comes with six different hanging hook heights for maximum flexibility. Trellis netting can be secured horizontally or vertically. Four-pole works with #706120, #706121 & #706122 tray stands. Six-pole works with #706135 & #706124 tray stands. Trellis netting not included.

Light Rail 5 Add-A-Bar Kit

The new Light Rail 5 is great for multiple reflectors. 90+ lb. capacity if properly balanced. The new Light Rail 5 is extremely heavy-duty and functional. Comes with an adjustable crossbar, 8' rail, and a high torque 4 RPM motor.

Kit Contains:
Adjustable Crossbar (81”, 87”, 93”)
Light Rail 5 Auxiliary Trolley
Sectioned Push-Pull Rod
Mounting Hardware
Instructions

Heavy-duty 2 ft x 4 ft quick assembly tray stand. Absolutely no tools required. Can be assembled in 5 minutes or less. Accommodates all popular brand (ID) inside dimension trays and reservoirs including Flo-n-Gro®, Duralastics®, Botanicare® and more. Overall height is 25 in. Height from bottom bar to floor is 18 in without casters. Outside dimensions: 53 in length x 28.5 in wide. Inside dimensions: 51 in length x 26.5 in wide.

Heavy-duty 3 ft x 3 ft quick assembly tray stand. Absolutely no tools required. Can be assembled in 5 minutes or less. Accommodates all popular brand (ID) inside dimension trays and reservoirs including Flo-n-Gro®, Duralastics®, Botanicare® and more. Overall height is 25 in. Height from bottom bar to floor is 18 in without casters. Outside dimensions: 41.3 in length x 41.3 in wide. Inside dimensions: 39.3 in length x 39.3 in wide.

10 RPM Intelli-drive motor w/ 0-60 sec. time delay, adjustable from 0 - 60 sec.

10 RPM intelli-drive motor (LR3.5ID9) w/6' rail plus mounting hardware

For a rectangular growing area, a linear lamp moving system is preferable. The self propelled Light Rail 3.5 Intelli Drive is without question, the finest linear lamp-mover available. It uses no pulleys, chains or gears. Simply mount the standard 6 foot track over the desired area and place the lamp-moving drive motor onto the track. The Light Rail 3.5 Intelli Drive is supplied with adjustable switch stops, so lamp travel can be any length you wish. This is perfect for a start-up size garden through to a full growth garden. The standard 6-foot track may also be extended. Light Rail 3.5 comes with a 2 Year Factory Warranty.

Adjust-a-Drive MOTOR ONLY

The all new LightRail 4.0 AdjustaDrive is the newest linear light mover available from Gualala Robotics Inc.

For a rectangular growing area, a linear lamp moving system is preferable. The self propelled Light Rail 4.0 Adjust-a-Drive is without question, the finest linear lamp-mover available. It uses no pulleys, chains or gears. Simply mount the standard 6 foot track over the desired area and place the lamp-moving drive motor onto the track. The Light Rail 4.0 Adjust-a-Drive is supplied with adjustable switch stops, so lamp travel can be any length you wish. This is perfect for a start-up size garden through to a full growth garden. The standard 6 foot track may also be extended. Light Rail 4.0 comes with a 2 Year Factory Warranty.

With both a 0 to 60 second adjustable time delay for promoting even growth from end to end, and a two to four feet per minute adjustable speed that covers a wide range of lamp intensities and travel distances. The all new LightRail 4 AdjustaDrive from Gualala Robotics Inc., designed and manufactured in the USA and is the ultimate in light mover control and is compatible with all LightRail 3.0 and 3.5 rails and accessory items.

Light Rail 4.0 is rated to 35 lbs
Light Rail 5.0 is rated to 100 lbs

RPM is adjustable from 6 RPM (2 ft/min) to 10 RPM (4 ft/min)

For a rectangular growing area, a linear lamp moving system is preferable. The self propelled Light Rail 3.5 Intelli Drive is without question, the finest linear lamp-mover available. It uses no pulleys, chains or gears. Simply mount the standard 6 foot track over the desired area and place the lamp-moving drive-motor onto the track. The Light Rail 3.5 Intelli Drive is supplied with adjustable switch stops, so lamp travel can be any length you wish. This is perfect for a start-up size garden through to a full growth garden. The standard 6 foot track may also be extended. These complete kits are available in either 6 RPM or 9 RPM models.

Light Rail works great with all reflectors!

The all new LightRail 4.0 Adjust-a-Drive is the newest linear light mover available from Gualala Robotics Inc. With both a 0 to 60 second adjustable time delay for promoting even growth from end to end, and a two to four feet per minute adjustable speed that covers a wide range of lamp intensities and travel distances. The all new LightRail 4 AdjustaDrive from Gualala Robotics Inc., designed and manufactured in the USA and is the ultimate in light mover control and is compatible with all LightRail 3.0 and 3.5 rails and accessory items.

Adjust-a-drive motor w/6' rail plus mounting hardware

The all new LightRail 4.0 AdjustaDrive is the newest linear light mover available from Gualala Robotics Inc.

For a rectangular growing area, a linear lamp moving system is preferable. The self propelled Light Rail 4.0 Adjust-a-Drive is without question, the finest linear lamp-mover available. It uses no pulleys, chains or gears. Simply mount the standard 6 foot track over the desired area and place the lamp-moving drive motor onto the track. The Light Rail 4.0 Adjust-a-Drive is supplied with adjustable switch stops, so lamp travel can be any length you wish. This is perfect for a start-up size garden through to a full growth garden. The standard 6 foot track may also be extended. Light Rail 4.0 comes with a 2 Year Factory Warranty.

With both a 0 to 60 second adjustable time delay for promoting even growth from end to end, and a two to four feet per minute adjustable speed that covers a wide range of lamp intensities and travel distances. The all new LightRail 4 AdjustaDrive from Gualala Robotics Inc., designed and manufactured in the USA and is the ultimate in light mover control and is compatible with all LightRail 3.0 and 3.5 rails and accessory items.

Light Rail 4.0 is rated to 35 lbs
Light Rail 5.0 is rated to 100 lbs

RPM is adjustable from 6 RPM (2 ft/min) to 10 RPM (4 ft/min)

L 42.5in x W 17in x H 6in

Heavy-duty 3 ft x 6 ft quick assembly tray stand. Absolutely no tools required. Can be assembled in 5 minutes or less. Accommodates all popular brand (ID) inside dimension trays and reservoirs including Flo-n-Gro®, Duralastics®, Botanicare® and more. Overall height is 25 in. Height from bottom bar to floor is 18 in without casters. Outside dimensions: 79 in length x 41.25 in wide. Inside dimensions: 77 in length x 39.25 in wide. Tray sold separately and may fit differently depending on brand. US Patents: 8,714,498, D756,690 and 9,084,478; Chinese Patent: 201280018267.2; Patents Pending: 29/562,014, US20150320200, AU2012290715, EP2725947 and HK1193554A; and PCT Application: WO2013/019268.

L 53.94in x W 17.52in x H 6.3in

Heavy-duty 4 ft x 8 ft quick assembly tray stand. Absolutely no tools required. Can be assembled in 5 minutes or less. Accommodates all popular brand (ID) inside dimension trays and reservoirs including Flo-n-Gro®, Duralastics®, Botanicare® and more. Overall height is 25 in. Height from bottom bar to floor is 18 in without casters. Outside dimensions: 102 in length x 53 in wide. Inside dimensions: 100 in length x 51 in wide. Tray sold separately and may fit differently depending on brand. US Patents: 8,714,498, D756,690 and 9,084,478; Chinese Patent: 201280018267.2; Patents Pending: 29/562,014, US20150320200, AU2012290715, EP2725947 and HK1193554A; and PCT Application: WO2013/019268.

LightRail 4.20 AdjustaDrive Kit comes complete with a variable speed LightRail 4.0 AdjustaDrive Motor, a two-piece 2 meter (6’6”) Rail, an Add A Lamp Kit with another 2-meter Rail, Push/Pull Rod, Auxiliary Trolley, instructions and hardware for moving two lights with the enclosed Motor. In addition, this indoor grow Kit comes with pre-installed Extreme Duty Trolley Wheels rated to 60 lbs, and these wheels have a lifetime warranty! Move two lights along 4 meters (12’) of Rail and all from one Kit box – the LightRail 4.20 – With both a 0 to 60 second adjustable time delay for promoting even growth from end to end plus the added feature of two to four feet per minute adjustable speed control that covers a wide range of lamp intensities and travel distances, LightRail 4.20 is great for customers who want that additional control. LightRail 4.20 will move any grow lights/ any hoods, multiple sizes and weights and is a scalable system where up to three indoor grow lights can move in-line with the use of one Motor. LightRail is just right for any indoor grow equipment set up including indoor grow light systems, seasonal greenhouse lighting, all season greenhouse grow lights, grow tent set ups and commercial grower facilities.

Light Rail 5, Motor, Crossbar, 8' Rail

The new Light Rail 5 is great for multiple reflectors. 90+ lb. capacity if properly balanced. The new Light Rail 5 is extremely heavy-duty and functional. Comes with an adjustable crossbar, 8' rail, and a high torque 4 RPM motor.

From the all new "triple duty" extruded aluminum track, super "wide-n-stable" carriage with steel on steel carrier bearings, to the high torque instrument grade drive motor with ball bearing output shaft and "sure grip" dual drive design. The new Light Rail 5 ismore than capable of moving 2 or 3 lamps, side by side or fore and aft.

The Fast Fit® Rolling Bench 4 ft x 8 ft is a great solution to maximize your grow room space. This unique design allows the tabletop to smoothly roll from side to side, eliminating the need for multiple aisles between each row. This rolling bench system is expandable and can easily be connected end to end to create custom lengths. The rolling bars are made from heavy-duty galvanized steel. The base and tabletop frame are constructed with heavy-duty steel with a long-lasting powder-coated finish for excellent protection from grow room environments. Assembles quickly with minimal tools and hardware. Accommodates the industry’s largest (ID) inside dimension grow trays. Rolls 9 in to each side.